5945-00-763-3411 RELAY,ELECTROMAGNETIC Index 5935-00-763-3414 CONNECTOR,ELECTRICA

National Stock Number:
5310-00-763-3413

Federal Supply Class:
5310

National Item Identification Number:
007633413

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
133A1624P12D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
3620501 FIND 26799193HONEYWELL INTERNATIONAL INC.
516108576PENTAIR FILTRATION SOLUTIONS, LLC
5310PL07304299009HINSPEKTORAT WSPARCIA SIL ZBROJNYCH
537628-2096214RAYTHEON COMPANY
756345-10398897LOCKHEED MARTIN CORP
759-006-02226055PARKER-HANNIFIN CORPORATION
B2220477264PHOENIX SPECIALTY MFG CO INC
MS14151-680205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
HS306-2238V613THE BOEING COMPANY
MS14151-696906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
899407-1D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
C271347-7K1987BAE SYSTEMS PLC
C271347-7U9143BAE SYSTEMS (OPERATIONS) LIMITED
MS15795-84780205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS15795-84796906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS15795-847 CRE S 316D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.203 INCHES NOMINAL
OVERALL DIAMETER0.560 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL CORROSION RESISTING OVERALL
PERIPHERAL SHAPE STYLEROUND
SURFACE TREATMENTPASSIVATE OVERALL
THICKNESS0.032 INCHES NOMINAL


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us