5970-00-802-4697 INSULATOR,DUCT SUPP Index 1560-00-802-4702 FLANGE,AIR FLOW VAL

National Stock Number:
5310-00-802-4701

Federal Supply Class:
5310

National Item Identification Number:
008024701

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
0716643S3002GENERAL DYNAMICS EUROPEAN LAND SYSTEMS - MOWAG GMBH
10121704A486GNIMIKKEISTOKESKUS NCB FINLAND
1112-5108-130772AELBIT SYSTEMS ELECTRO-OPTICS ELOP LTD
223937075Q65OSHKOSH DEFENSE LLC
3826681795ALLIANZ SWEEPER COMPANY
1361280-19D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
58365100000ORDNANCE CORPS
8910195P802769LOCKHEED MARTIN CORPORATION
526-018844940CUMMINS POWER GENERATION INC.
4001645X050CRYSTEEL MANUFACTURING, INC
5310PL07011649009HINSPEKTORAT WSPARCIA SIL ZBROJNYCH
8024701D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
5310004040773SCY13E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
5310008024701SCY13E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
E108165 FIND N0 2293X894CONTROL FLOW, INC.
E108165 FIND NO 2293X894CONTROL FLOW, INC.
WG1083703X894CONTROL FLOW, INC.
8910195P849671LOCKHEED MARTIN CORP LOCKHEED MARTIN INFORMATION SYSTEMS AUTOMATED SPARES
925000-081365597THALES USA, INC.
MS15795-81380205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
FFW92TYPEAGRADE1CLASSBMEDIUM81348FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
MS15795-31396906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS15795-81396906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS15795-8L3D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
MS15795-613D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
MATERIALSTEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 316 OVERALL
PERIPHERAL SHAPE STYLEROUND
PROPRIETARY CHARACTERISTICSPACS
NONDEFINITIVE SPEC/STD DATAA TYPE AND 1 GRADE AND B CLASS
OVERALL DIAMETER0.868 INCHES MINIMUM AND 0.905 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
THICKNESS0.064 INCHES MINIMUM AND 0.104 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us