5310-00-982-6584, WASHER,FLAT

National Stock Number:
5310-00-982-6584

Federal Supply Class:
5310

National Item Identification Number:
009826584

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

10391981	A486G	NIMIKKEISTOKESKUS NCB FINLAND
11180-20-37	34161	KOEHRING CO
11180-20-37	61465	GARWOOD/FELLER INC GARWOOD WINCH DIV
11180-20-37	81336	CHIEF OF ENGINEERS DEPT OF ARMY
FF-W-92	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
11180-20-37	8E499	KOEHRING CRANES AND EXCAVATORS INC SUB OF NORTHWEST ENGINEERING CO
MS15795-225	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS27183-26	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

CENTER HOLE SHAPE STYLE	ROUND
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
HOLE DIAMETER	0.931 INCHES MINIMUM AND 0.968 INCHES MAXIMUM
OVERALL DIAMETER	2.243 INCHES MINIMUM AND 2.280 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL OVERALL
NONDEFINITIVE SPEC/STD DATA	A TYPE AND 1 GRADE
PERIPHERAL SHAPE STYLE	ROUND
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
THICKNESS	0.136 INCHES MINIMUM AND 0.192 INCHES MAXIMUM

Click here to Register for Free 30-day Trial