|
|
|
National Stock Number:
5310-01-045-6621
Federal Supply Class:
5310
National Item Identification Number:
010456621
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| MDE32248-119 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| MATERIAL | STEEL COMP 303 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763SE,COND B FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | STYLE DESIGNATOR | RECESSED BOTH SIDES | | HOLE DIAMETER | 0.315 INCHES MINIMUM AND | | 0.324 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.750 INCHES NOMINAL | | MATERIAL THICKNESS | 0.700 INCHES NOMINAL | | TOP RECESS DIAMETER | 0.435 INCHES MINIMUM AND | | 0.444 INCHES MAXIMUM | | BOTTOM RECESS DIAMETER | 0.435 INCHES MINIMUM AND | | 0.444 INCHES MAXIMUM | | BOTTOM RECESS ANGLE | 100.0 DEGREES NOMINAL | | TOP RECESS ANGLE | 100.0 DEGREES NOMINAL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 76301 | | DESIGN CONTROL REFERENCE | MDE32248-119 |
|
|