|
|
|
National Stock Number:
5310-01-046-3911
Federal Supply Class:
5310
National Item Identification Number:
010463911
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| MS19068-081 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| TEST DATA DOCUMENT | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING | | DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CENTER SPECIAL QUALITY CONTROL PROVISIONS | | CRITICALITY CODE JUSTIFICATION | ZZZW | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 96906 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MS19068-081 | | THREAD SERIES | UNEF | | NOMINAL THREAD SIZE | 1.625 INCHES | | THREAD QUANTITY PER INCH | 18 | | THREAD PITCH DIAMETERS | 1.5269 TO 1.5314 INCHES | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | STEEL OVERALL | | NUT STYLE | ROUND | | DRIVE POINT DEPTH | 0.084 INCHES MINIMUM AND | | 0.104 INCHES MAXIMUM | | NUT DIAMETER | 2.235 INCHES MINIMUM AND | | 2.255 INCHES MAXIMUM | | NUT THICKNESS | 0.428 INCHES MINIMUM AND | | 0.448 INCHES MAXIMUM | | DRIVE POINT WIDTH | 0.240 INCHES MINIMUM AND | | 0.260 INCHES MAXIMUM | | DRIVE POINT QUANTITY | 4 |
|
|