5310-01-049-4075, WASHER,FLAT

National Stock Number:
5310-01-049-4075

Federal Supply Class:
5310

National Item Identification Number:
010494075

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

BACW10BP6AP

81205

THE BOEING COMPANY

Techincal Specification:

CENTER HOLE SHAPE STYLE	ROUND
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
HOLE DIAMETER	0.376 INCHES MINIMUM AND 0.387 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	IRON ALLOY 660 OVERALL
PERIPHERAL SHAPE STYLE	ROUND
MINIMUM TENSILE STRENGTH	140000 POUNDS PER SQUARE INCH
OVERALL DIAMETER	0.649 INCHES MINIMUM AND 0.669 INCHES MAXIMUM
SPECIFICATION/STANDARD DATA	81205-BACW10BP MANUFACTURERS STANDARD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	AMS 2416 ASSN STD 1ST TREATMENT RESPONSE AND AMS 2416 ASSN STD 2ND TREATMENT RESPONSE OVERALL
SURFACE TREATMENT
THICKNESS	0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM

Click here to Register for Free 30-day Trial