|
|
|
National Stock Number:
5310-01-054-5063
Federal Supply Class:
5310
National Item Identification Number:
010545063
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 205-C03020 | 33827 | BAE SYSTEMS INTEGRATED DEFENSE SOLUTIONS INC. |
|
Techincal Specification:
| CENTER HOLE WIDTH | 0.410 INCHES NOMINAL | | CENTER HOLE SHAPE STYLE | SQUARE | | CROSS-SECTIONAL SHAPE STYLE | BLANK RECTANGULAR | | OUTSIDE LEFT CORNER CHAMFER ANGLE | 30.0 DEGREES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582,TY 303,COND A ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | PERIPHERAL SHAPE STYLE | HEXAGON | | WIDTH ACROSS FLATS | 0.913 INCHES MINIMUM AND 0.945 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TY 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.100 INCHES NOMINAL |
|
|