|
|
|
National Stock Number:
5310-01-055-8423
Federal Supply Class:
5310
National Item Identification Number:
010558423
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 0N503165 | 98230 | NATIONAL SECURITY AGENCY |
|
Techincal Specification:
| COUNTERBORE DIAMETER | 0.117 INCHES MINIMUM AND 0.123 INCHES MAXIMUM OVERALL EXCEPT THREADS | | CROSS-SECTIONAL SHAPE | ROUND OVERALL | | FLANGE DIAMETER | 0.250 INCHES MAXIMUM | | FLANGE THICKNESS | 0.060 INCHES NOMINAL | | HOLE CONFIGURATION STYLE | CONFIGURATION G | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | COPPER ALLOY 360 OVERALL | | NOMINAL THREAD SIZE | 0.112 INCHES | | NUT COUNTERBORE DEPTH | 0.180 INCHES MINIMUM OVERALL EXCEPT THREADS | | NUT DIAMETER | 0.152 INCHES MINIMUM AND 0.154 INCHES MAXIMUM | | NUT LENGTH | 0.180 INCHES NOMINAL | | NUT STYLE | SLEEVE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,CLASS 2,TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | TEST DATA DOCUMENT | 98230-0N503165 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES | UNC | | THREAD QUANTITY PER INCH | 40 |
|
|