|
|
|
National Stock Number:
5310-01-056-2185
Federal Supply Class:
5310
National Item Identification Number:
010562185
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 2006408-1 | 17576 | GOODRICH CORP DBA GOODRICH CORP | | 2006408-1 | 6K4C8 | GOODRICH CORPORATION | | 5310PL0743593 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CRITICALITY CODE JUSTIFICATION | SUPP | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.328 INCHES NOMINAL | | OVERALL DIAMETER | 0.750 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626,COND E-4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4140 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SPECIAL FEATURES | USED ON F-16 NHA 1620-01-234-8655 | | SUPPLEMENTARY FEATURES | ITEM IS NOT CSI BUT HAS CRITICAL FEATURE SUCH AS HEAT TREATMENT,SURFACE FINISH,OR MATERIAL TYPE AND SPECIAL INSPECTION REQUIREMENTS SUCH AS MAGNETIC PARTICLE INSPECTION OR FLUORESCENT PENETRANT INSPECTION | | SURFACE FINISH | 63.0 MICROINCHES ALL SURFACES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE II,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THICKNESS | 0.125 INCHES NOMINAL |
|
|