| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 2.690 INCHES MINIMUM AND 2.710 INCHES MAXIMUM |
| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 1.340 INCHES MINIMUM AND 1.360 INCHES MAXIMUM |
| LOCKING FEATURE | PREVAILING TORQUE WITH METALLIC INSERT |
| MATERIAL DOCUMENT AND CLASSIFICATION | L-P-395,TYPE 1,CLASS 1 OR CLASS 2 FED SPEC SINGLE MATERIAL RESPONSE NUT |
| MATERIAL | PLASTIC POLYHEXAMETHYLENE ADIPAMIDE NUT |
| MATERIAL | STEEL LOCKING INSERT |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| MOUNTING HOLE DIAMETER | 0.098 INCHES MINIMUM AND 0.108 INCHES MAXIMUM |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| NUT HEIGHT | 1.750 INCHES NOMINAL |
| NUT MOUNTING PROVISION | STRAIGHT HOLES |
| NUT STYLE | PLATE |
| NUT LENGTH | 3.170 INCHES MINIMUM AND 3.230 INCHES MAXIMUM |
| PLATE THICKNESS | 0.100 INCHES MINIMUM AND 0.120 INCHES MAXIMUM |
| PLATE WIDTH | 0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM |
| SPECIAL FEATURES | 0.063 IN. MIN,0.070 IN. MAX INSPECTION HOLE DRILLED THROUGH ON NUT LENGTH |
| SPECIFICATION/STANDARD DATA | 81205-BACN10NX MANUFACTURERS STANDARD |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE LOCKING INSERT |
| SURFACE TREATMENT | CADMIUM AND CHROMATE LOCKING INSERT |
| THREAD CLASS | 2B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES | UNF |