5310-01-070-3001, WASHER,FLAT

National Stock Number:
5310-01-070-3001

Federal Supply Class:
5310

National Item Identification Number:
010703001

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

NAS42DD4-016	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
NAS42DD4-1	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
NAS42DD4-1N	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE

Techincal Specification:

CENTER HOLE SHAPE STYLE	ROUND
COLOR	GRAY/GREY OR BLUE OVERALL
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
HOLE DIAMETER	0.127 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
OVERALL DIAMETER	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	WW-T-700/3,TEMPER T3,TY 1 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	ALUMINUM ALLOY 2024 OVERALL
MINIMUM TENSILE STRENGTH	62000 POUNDS PER SQUARE INCH
PERIPHERAL SHAPE STYLE	ROUND
SPECIFICATION/STANDARD DATA	80205-NAS42 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625,TY 1 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	ANODIZE OR CHROMATE OVERALL
THICKNESS	0.011 INCHES MINIMUM AND 0.021 INCHES MAXIMUM

Click here to Register for Free 30-day Trial