| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.750 INCHES MINIMUM AND 0.754 INCHES MAXIMUM |
| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.371 INCHES MINIMUM AND 0.381 INCHES MAXIMUM |
| FEATURES PROVIDED | FLOATING NUT |
| LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| LUBRICATION | DRY FILM LUBRICANT |
| OVERALL HEIGHT | 0.560 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-R-6855 CLASS1 GRADE 60 MIL SPEC SINGLE MATERIAL RESPONSE SEAL |
| MATERIAL | ALUMINUM ALLOY 7075 WASHER |
| MATERIAL | RUBBER SYNTHETIC SEAL |
| MATERIAL | STEEL NUT |
| MATERIAL | STEEL SHELL |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| MOUNTING HOLE DIAMETER | 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| NOMINAL THREAD SIZE | 0.250 INCHES |
| NUT HEIGHT | 0.350 INCHES MAXIMUM |
| NUT MOUNTING PROVISION | STRAIGHT HOLES |
| NUT STYLE | PLATE |
| NUT LENGTH | 1.000 INCHES MAXIMUM |
| PLATE THICKNESS | 0.020 INCHES NOMINAL |
| PLATE WIDTH | 0.635 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE WASHER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TYPE 2 CLASS 3 FED SPEC ALL TREATMENT RESPONSES SHELL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TYPE 2 FED SPEC ALL TREATMENT RESPONSES NUT |
| SURFACE TREATMENT | CHROMATE WASHER |
| SURFACE TREATMENT | CADMIUM AND CHROMATE NUT |
| SURFACE TREATMENT | CADMIUM AND CHROMATE SHELL |
| TEMP RATING | 225.0 FAHRENHEIT MAXIMUM |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 28 |
| THREAD SERIES | UNJF |