|
|
|
National Stock Number:
5310-01-071-8162
Federal Supply Class:
5310
National Item Identification Number:
010718162
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 4192481 | 80212 | BAE SYSTEMS LAND & ARMAMENTS L.P. |
|
Techincal Specification:
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/4 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-200/5 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-200/8 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/6 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/7 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5086 OR ALUMINUM ALLOY 6061 OVERALL | | NOMINAL THREAD SIZE | 0.375 INCHES | | NUT WIDTH ACROSS FLATS | 0.500 INCHES NOMINAL | | NUT LENGTH | 1.000 INCHES NOMINAL | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.688 INCHES MINIMUM AND 0.812 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 16 | | THREAD SERIES | UNC |
|
|