5310-01-072-2903, WASHER,RECESSED

National Stock Number:
5310-01-072-2903

Federal Supply Class:
5310

National Item Identification Number:
010722903

Description:
WASHER,RECESSED

Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.

Manufacturer Information:

140-007-16-16A3

97499

BELL TEXTRON INC

Techincal Specification:

BOTTOM RECESS ANGLE	89.5 DEGREES MINIMUM AND 90.5 DEGREES MAXIMUM
BOTTOM RECESS DIAMETER	0.310 INCHES MINIMUM AND 0.350 INCHES MAXIMUM
HOLE DIAMETER	0.249 INCHES MINIMUM AND 0.255 INCHES MAXIMUM
OUTSIDE DIAMETER	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6485 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS	0.089 INCHES MINIMUM AND 0.099 INCHES MAXIMUM
MATERIAL	STEEL COMP H11 OVERALL
MINIMUM TENSILE STRENGTH	240000 POUNDS PER SQUARE INCH
SPECIFICATION/STANDARD DATA	97499-140-007 MANUFACTURERS STANDARD
STYLE DESIGNATOR	RECESSED BOTH SIDES
SURFACE FINISH	63.0 MICROINCHES BOTTOM
SURFACE FINISH	63.0 MICROINCHES TOP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-8837 CL 2 TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
TOP RECESS ANGLE	89.5 DEGREES MINIMUM AND 90.5 DEGREES MAXIMUM
TOP RECESS DIAMETER	0.310 INCHES MINIMUM AND 0.350 INCHES MAXIMUM

Click here to Register for Free 30-day Trial