|
|
|
National Stock Number:
5310-01-085-4523
Federal Supply Class:
5310
National Item Identification Number:
010854523
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 244438 | 06853 | BENDIX COMMERCIAL VEHICLE SYSTEMS LLC | | 745-244438 | Z4117 | VOLVO GROUP GOVERNMENT SALES OCEANIA |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | BW-159-M,FSCM 06853 MFR REF SINGLE MATERIAL RESPONSE OR | | BW-203-M,FSCM 06853 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OR | | ZINC OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BW-101B-P,FSCM 06853 MFR REF 1ST TREATMENT RESPONSE OR | | BW-162B-P,FSCM 06853 MFR REF 2ND TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.878 INCHES NOMINAL | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 1.490 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.067 INCHES NOMINAL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 06853 | | DESIGN CONTROL REFERENCE | 244438 |
|
|