|
|
|
National Stock Number:
5310-01-085-4903
Federal Supply Class:
5310
National Item Identification Number:
010854903
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 433R539H01 | 97942 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| MATERIAL | ALUMINUM OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8 T651 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 CL 1A MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | STYLE DESIGNATOR | RECESSED | | HOLE DIAMETER | 0.145 INCHES MINIMUM AND | | 1.150 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.480 INCHES NOMINAL | | RECESS DIAMETER | 0.279 INCHES NOMINAL | | MATERIAL THICKNESS | 0.093 INCHES NOMINAL | | RECESS ANGLE | 99.5 DEGREES MINIMUM AND | | 100.5 DEGREES MAXIMUM | | SPECIAL FEATURES | OUTER EDGE ROUNDED | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 97942 | | DESIGN CONTROL REFERENCE | 433R539H01 |
|
|