|
|
|
National Stock Number:
5310-01-085-6763
Federal Supply Class:
5310
National Item Identification Number:
010856763
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 54732 | 0BPN7 | TIFCO INDUSTRIES, INC. | | M-362-20005 | 34623 | AM GENERAL LLC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1040 OR | | STEEL COMP 1541 OR | | STEEL COMP 1042 OR | | STEEL COMP 1043 OR | | STEEL COMP 1044 OR | | STEEL COMP 1045 OR | | STEEL COMP 1046 OR | | STEEL COMP 1548 OR | | STEEL COMP 1049 OR | | STEEL COMP 1050 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD ALL MATERIAL RESPONSES OVERALL | | SURFACE TREATMENT | PHOSPHATE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.812 INCHES MINIMUM AND | | 0.844 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 1.470 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.248 INCHES MINIMUM AND | | 0.280 INCHES MAXIMUM | | COLOR | BLACK OVERALL | | HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 34623 | | DESIGN CONTROL REFERENCE | M-362-20005 |
|
|