|
|
|
National Stock Number:
5310-01-087-0986
Federal Supply Class:
5310
National Item Identification Number:
010870986
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| MS9482-09 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| MATERIAL | STEEL COMP H11 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6485 ASSN STD SINGLE MATERIAL RESPONSE OR | | AMS 6437 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | NICKEL AND | | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2416 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 50.0 ROCKWELL C MINIMUM AND | | 56.0 ROCKWELL C MAXIMUM | | STYLE DESIGNATOR | RECESSED BOTH SIDES | | HOLE DIAMETER | 0.195 INCHES MINIMUM AND | | 0.210 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.415 INCHES MINIMUM AND | | 0.435 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.085 INCHES MINIMUM AND | | 0.095 INCHES MAXIMUM | | TOP RECESS DIAMETER | 0.250 INCHES MINIMUM AND | | 0.260 INCHES MAXIMUM | | BOTTOM RECESS DIAMETER | 0.250 INCHES MINIMUM AND | | 0.260 INCHES MAXIMUM | | BOTTOM RECESS ANGLE | 90.0 DEGREES NOMINAL | | TOP RECESS ANGLE | 90.0 DEGREES NOMINAL | | SURFACE FINISH | 63.0 MICROINCHES TOP | | 63.0 MICROINCHES BOTTOM | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 96906 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MS9482-09 |
|
|