|
|
|
National Stock Number:
5310-01-089-7086
Federal Supply Class:
5310
National Item Identification Number:
010897086
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| S8157AU120-090G | 99193 | HONEYWELL INTERNATIONAL INC. | | S8157AU292-090G | 70210 | HONEYWELL INTERNATIONAL INC. | | S8157AU292-090G | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4130 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OR | | MIL-S-18729 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.255 INCHES MINIMUM AND | | 0.260 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.500 INCHES MINIMUM AND | | 0.520 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.085 INCHES MINIMUM AND | | 0.095 INCHES MAXIMUM | | HARDNESS RATING | 38.0 ROCKWELL C MINIMUM AND | | 42.0 ROCKWELL C MAXIMUM | | SPECIAL FEATURES | DRY FILM LUBRICATION EMS 242 TY 1 CAGEC 70210 |
|
|