|
|
|
National Stock Number:
5310-01-194-7064
Federal Supply Class:
5310
National Item Identification Number:
011947064
Description:
NUT,PLAIN,HEXAGON
Detail:
A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see LOCKNUT, ELECTRICAL CONDUIT. See also LOCKNUT, TUBE FITTING. For items having a thickness (or height) exceeding two times the width across the flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. (When height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| BACN10DR4J | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| DRILLED HOLE DIAMETER | 0.036 INCHES MINIMUM AND 0.056 INCHES MAXIMUM | | BEARING SURFACE TYPE | CHAMFERED | | COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL NUT | | HOLE CONFIGURATION STYLE | CONFIGURATION B | | HOLE TYPE AND QUANTITY | 2 DRILLED | | NUT STYLE | HEXAGON | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 304 OVERALL | | NOMINAL THREAD SIZE | 0.438 INCHES | | NUT HEIGHT | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM | | WIDTH ACROSS FLATS | 0.684 INCHES MINIMUM AND 0.691 INCHES MAXIMUM | | SPECIFICATION/STANDARD DATA | 81205-BACN10DR MANUFACTURERS STANDARD | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 20 | | THREAD SERIES | UNIFIED NATIONAL JOINT FINE (UNJF) |
|
|