5310-01-413-6125, WASHER,FLAT

National Stock Number:
5310-01-413-6125

Federal Supply Class:
5310

National Item Identification Number:
014136125

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

NAS1149DN316J

80205

NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE

Techincal Specification:

CENTER HOLE SHAPE STYLE	ROUND
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
HOLE DIAMETER	0.095 INCHES MINIMUM AND 0.115 INCHES MAXIMUM
OVERALL DIAMETER	0.245 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	ALUMINUM ALLOY 2024 AND ALUMINUM ALLOY 1230 OVERALL
PERIPHERAL SHAPE STYLE	ROUND
SPECIFICATION/STANDARD DATA	80205-NAS1149 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-5541, CL3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CHROMATE OVERALL
THICKNESS	0.013 INCHES MINIMUM AND 0.019 INCHES MAXIMUM

Click here to Register for Free 30-day Trial