5995-01-510-0345 CABLE ASSEMBLY,SPECIAL PURPOSE,ELECTRICAL Index 2010-01-510-0347 PROPELLING UNIT,OUTBOARD

National Stock Number:
5310-01-510-0346

Federal Supply Class:
5310

National Item Identification Number:
015100346

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
NAS1149CN532B80205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
COLORBLACK OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
OVERALL DIAMETER0.433 INCHES MINIMUM AND 0.458 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OR ASATM 5510 ASSN STD 5TH MATERIAL RESPONSE OR AMS 5512 ASSN STD 6TH MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 316 OR STEEL COMP 321 OR STEEL COMP 347 OVERALL
NONDEFINITIVE SPEC/STD DATACRES MATERIAL AND BLACK OXIDE FINISH AND 0.032 SIZE
PERIPHERAL SHAPE STYLEROUND
SPECIFICATION/STANDARD DATA80205-NAS1149 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-13924 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTOXIDE OVERALL
THICKNESS0.028 INCHES MINIMUM AND 0.036 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us