5310-01-523-4584, WASHER,FLAT

4730-01-523-4585 SLEEVE,CLINCH,TUBE FITTING

National Stock Number:
5310-01-523-4584

Federal Supply Class:
5310

National Item Identification Number:
015234584

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

BACW10BN7SP

81205

THE BOEING COMPANY

Techincal Specification:

CENTER HOLE SHAPE STYLE	ROUND
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
HOLE DIAMETER	0.4380 INCHES MINIMUM AND 0.4490 INCHES MAXIMUM
OVERALL DIAMETER	0.830 INCHES MINIMUM AND 0.850 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL CORROSION RESISTING OVERALL
PERIPHERAL SHAPE STYLE	ROUND
SPECIFICATION/STANDARD DATA	81205-BACW10BN MANUFACTURERS SOURCE CONTROL
SPECIAL FEATURES	SUBASSEMBLY IS FLAP ASSY-TE INBD;REFER TO BOEING I.P.C. BOE2427 27-51-02-10A NO. 712
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416, TY 2, CL 2 FED SPEC 1ST TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM OVERALL
THICKNESS	0.4380 INCHES MINIMUM AND 0.4490 INCHES MAXIMUM

Click here to Register for Free 30-day Trial