|
|
|
National Stock Number:
5310-01-556-5386
Federal Supply Class:
5310
National Item Identification Number:
015565386
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 0400490 | 32MY9 | MILLER INDUSTRIES TOWING EQUIPMENT INC | | 10039369 | 61C19 | MIL-COTS CORPORATION | | 11101377 | 0Y3H3 | FASTENAL COMPANY | | 12759-00518 | 0Y3H3 | FASTENAL COMPANY | | 25712R1 | 338X5 | ND DEFENSE LLC | | 25712R1 | Z0009 | INTERNATIONAL TRUCKS AUSTRALIALIMITED | | ESP-F-16.101-GS | 338X5 | ND DEFENSE LLC | | ESP-F-16.104-PP | 338X5 | ND DEFENSE LLC |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | III HEAT TREATMENT | HARDENED | | PERIPHERAL SHAPE STYLE | ROUND | | PROPRIETARY CHARACTERISTICS | NPAC | | OVERALL DIAMETER | 1.500 INCHES NOMINAL | | SURFACE TREATMENT | ZINC OVERALL | | THICKNESS | 0.170 INCHES MINIMUM AND 0.195 INCHES MAXIMUM | | HOLE DIAMETER | 0.750 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | CENTER HOLE SHAPE STYLE | ROUND |
|
|