|
|
|
National Stock Number:
5315-00-001-5335
Federal Supply Class:
5315
National Item Identification Number:
000015335
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 35613 | 19156 | MOOG INC | | 35613 | 79294 | E-SYSTEMS INC MONTEK DIV FLUID CONTROLS OPNS | | 35613 | 94697 | MOOG INC | | 35613 | 9P5N5 | MOOG MILITARY AIRCRAFT LLC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 416 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,TYPE 416 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | WPS10012,79294 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND | | 45.0 ROCKWELL C MAXIMUM OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.020 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.045 INCHES MINIMUM AND | | 0.050 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.045 INCHES MINIMUM AND | | 0.050 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.050 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 0.460 INCHES MINIMUM AND | | 0.470 INCHES MAXIMUM | | SURFACE FINISH | 125.0 MICROINCHES BOTH ENDS | | 16.0 MICROINCHES OUTSIDE DIAMETER | | PIN OVERALL LENGTH | 0.570 INCHES MINIMUM AND | | 0.580 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.1970 INCHES MINIMUM AND | | 0.1972 INCHES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 79294 | | DESIGN CONTROL REFERENCE | 35613 |
|
|