| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.090 INCHES NOMINAL |
| CHAMFER LENGTH | 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| DIAMETER | 0.1250 INCHES MINIMUM AND 0.1255 INCHES MAXIMUM |
| FIRST HOLE DIAMETER | 0.040 INCHES NOMINAL |
| HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD STYLE | FLAT |
| HEIGHT | 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6304 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 601 OVERALL |
| PIN HEAD DIAMETER | 0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| PIN CHAMFER ANGLE | 14.0 DEGREES MINIMUM AND 16.0 DEGREES MAXIMUM |
| STYLE DESIGNATOR | STRAIGHT |
| SURFACE FINISH | 32.0 MICROINCHES LARGE SHANK |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-26074 CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | NICKEL OVERALL |
| UNDER HEAD LENGTH | 0.620 INCHES MINIMUM AND 0.630 INCHES MAXIMUM |