|
|
|
National Stock Number:
5315-00-896-6735
Federal Supply Class:
5315
National Item Identification Number:
008966735
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 003052 | 34228 | L3 TECHNOLOGIES, INC. | | 003052 | 4N133 | CHATHAM PRECISION INC | | 547A003052 | 03956 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 547A003052 | 34228 | L3 TECHNOLOGIES, INC. | | 547B003052 | 34228 | L3 TECHNOLOGIES, INC. | | A-547.611 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | A547-611 | 34228 | L3 TECHNOLOGIES, INC. | | A547-611 | 4N133 | CHATHAM PRECISION INC |
|
Techincal Specification:
| FIRST END STYLE | CHAMFERED | | FIRST END LOCATION | BOTH ENDS | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.031 INCHES NOMINAL | | OVERALL LENGTH | 2.187 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 303 OVERALL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND SHANK DIAMETER | 0.2495 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM | | SECOND SHANK LENGTH | 1.500 INCHES NOMINAL | | SHANK DIAMETER | 0.1873 INCHES MINIMUM AND 0.1878 INCHES MAXIMUM | | SHANK LENGTH | 0.531 INCHES NOMINAL | | SHOULDER DIAMETER | 0.2495 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM | | STYLE DESIGNATOR | UNDERCUT | | SURFACE TREATMENT | PASSIVATE OVERALL | | UNDERCUT DIAMETER | 0.228 INCHES MINIMUM AND 0.232 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.029 INCHES MINIMUM AND 0.032 INCHES MAXIMUM |
|
|