|
|
|
National Stock Number:
5315-01-043-9709
Federal Supply Class:
5315
National Item Identification Number:
010439709
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 16S180-9 | 81755 | LOCKHEED MARTIN CORPORATION | | 16S180-9 | T0544 | TUSAS HAVACILIK VE UZAY SAN.A.S. | | 5315PL0849979 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH |
|
Techincal Specification:
| MATERIAL | STEEL COMP 321 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 CLASS 321 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | STYLE DESIGNATOR | SHOULDER | | SHANK LENGTH | 0.490 INCHES NOMINAL | | SHOULDER DIAMETER | 0.372 INCHES MINIMUM AND | | 0.376 INCHES MAXIMUM | | SHANK DIAMETER | 0.247 INCHES MINIMUM AND | | 0.251 INCHES MAXIMUM | | OVERALL LENGTH | 0.960 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.050 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | SQUARE | | FIRST END LOCATION | SHANK END | | HOLE ARRANGEMENT STYLE | ONE END W/TWO DRILLED HOLES | | FIRST HOLE DIAMETER | 0.076 INCHES NOMINAL | | SECOND HOLE DIAMETER | 0.076 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.180 INCHES NOMINAL | | ANGLE BETWEEN CENTERLINE OF HOLES | 90.0 DEGREES NOMINAL | | SURFACE FINISH | 125.000 MICROINCHES OVERALL | | SPECIAL FEATURES | SHOULDER FLAT FROM SHANK 2 SIDES 0.290 IN. LG,0.251 WIDE ACROSS | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 81755 | | DESIGN CONTROL REFERENCE | 16S180-9 |
|
|