|
|
|
National Stock Number:
5315-01-070-6486
Federal Supply Class:
5315
National Item Identification Number:
010706486
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 69725-6L30 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| CHAMFER LENGTH | 0.047 INCHES NOMINAL | | DIAMETER | 0.1869 INCHES MINIMUM AND 0.1874 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.091 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.065 INCHES MINIMUM AND 0.070 INCHES MAXIMUM | | HARDNESS RATING | 45.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL | | HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) | | HEIGHT | 0.047 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | HS2776-HS178,FSCM 73030 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | PIN CHAMFER ANGLE | 13.0 DEGREES MINIMUM AND 17.0 DEGREES MAXIMUM | | PIN HEAD DIAMETER | 0.312 INCHES NOMINAL | | STYLE DESIGNATOR | STRAIGHT | | SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER | | SURFACE FINISH | 63.0 MICROINCHES HEAD BEARING SURFACE | | UNDER HEAD LENGTH | 1.031 INCHES NOMINAL |
|
|