|
|
|
National Stock Number:
5315-01-071-8873
Federal Supply Class:
5315
National Item Identification Number:
010718873
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 4179134 | 80212 | BAE SYSTEMS LAND & ARMAMENTS L.P. |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.342 INCHES NOMINAL | | FIRST END LOCATION | BOTH ENDS | | FIRST HOLE DIAMETER | 0.127 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.045 INCHES MINIMUM AND 0.075 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | OVERALL LENGTH | 3.250 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-631 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1010 OVERALL | | NOMINAL THREAD SIZE | 0.375 INCHES | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND SHANK LENGTH | 1.935 INCHES NOMINAL | | SHANK DIAMETER | 0.360 INCHES MINIMUM AND 0.375 INCHES MAXIMUM | | SHANK LENGTH | 1.045 INCHES NOMINAL | | SHOULDER DIAMETER | 0.484 INCHES MINIMUM AND 0.500 INCHES MAXIMUM | | STYLE DESIGNATOR | UNDERCUT | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 1.935 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNC | | UNDERCUT DIAMETER | 0.290 INCHES NOMINAL | | UNDERCUT WIDTH | 0.130 INCHES NOMINAL |
|
|