|
|
|
National Stock Number:
5315-01-076-2403
Federal Supply Class:
5315
National Item Identification Number:
010762403
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 111711-1 | 19564 | CRSI INC DELAWARE DIV GENERAL DYNAMICS SATCOM TECHNOLOGIES INC. |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 3.380 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.990 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.171 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 30.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.620 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL | STEEL COMP 303 OVERALL | | PIN OVERALL DIAMETER | 1.0000 INCHES NOMINAL | | PIN OVERALL LENGTH | 4.750 INCHES NOMINAL | | SECOND END STYLE | SQUARE | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND HOLE DIAMETER | 0.187 INCHES MINIMUM AND 0.192 INCHES MAXIMUM | | SPECIAL FEATURES | INCLUDES PIN INSTALLED IN LARGE HOLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TYPE 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|