|
|
|
National Stock Number:
5315-01-077-9058
Federal Supply Class:
5315
National Item Identification Number:
010779058
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 22039000-01 | 0XWR4 | UNITED DYNAMICS, INC | | 504819-1 | 96124 | TRANSDIGM INC |
|
Techincal Specification:
| UNDER HEAD LENGTH | 0.288 INCHES MINIMUM AND | | 0.298 INCHES MAXIMUM | | DIAMETER | 0.0932 INCHES MINIMUM AND | | 0.0937 INCHES MAXIMUM | | HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL COMP 630 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 COND A ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 TYPE 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | CHAMFER LENGTH | 0.030 INCHES NOMINAL | | PIN CHAMFER ANGLE | 15.0 DEGREES MINIMUM AND | | 25.0 DEGREES MAXIMUM | | PIN HEAD DIAMETER | 0.213 INCHES MINIMUM AND | | 0.223 INCHES MAXIMUM | | HEIGHT | 0.035 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.037 INCHES MINIMUM AND | | 0.042 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.057 INCHES NOMINAL | | SURFACE FINISH | 125.0 MICROINCHES ALL OTHER SURFACES | | 32.0 MICROINCHES OUTSIDE DIAMETER | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 96124 | | DESIGN CONTROL REFERENCE | 504819-1 |
|
|