|
|
|
National Stock Number:
5315-01-093-1680
Federal Supply Class:
5315
National Item Identification Number:
010931680
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 12250032 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.120 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 10.260 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.110 INCHES MINIMUM AND 0.113 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL | STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OVERALL | | PIN OVERALL LENGTH | 10.500 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.3690 INCHES MINIMUM AND 0.3740 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.110 INCHES MINIMUM AND 0.113 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-50002,TY M,COMP A MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE MANGANESE OVERALL |
|
|