|
|
|
National Stock Number:
5315-01-148-3730
Federal Supply Class:
5315
National Item Identification Number:
011483730
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 206-4775633 ITEM 14 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.080 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.0425 INCHES NOMINAL | | FIRST END LOCATION | THREADED END | | FIRST HOLE DIAMETER | 0.070 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | OVERALL LENGTH | 2.560 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-281 FORM A FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | NICKEL ALLOY 400 OVERALL | | NOMINAL THREAD SIZE | 0.375 INCHES | | SHANK LENGTH | 0.530 INCHES NOMINAL | | SHOULDER DIAMETER | 0.500 INCHES NOMINAL | | SECOND END STYLE | SQUARE | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND SHANK DIAMETER | 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM | | SECOND SHANK LENGTH | 1.310 INCHES NOMINAL | | SHANK DIAMETER | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM | | SPECIAL FEATURES | TWO SYMMETRICAL FLATS ON SHOULDER | | STYLE DESIGNATOR | SHOULDER | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.810 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
|
|