|
|
|
National Stock Number:
5315-01-217-2344
Federal Supply Class:
5315
National Item Identification Number:
012172344
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 12293938-13 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 12293938-13 | 7L727 | M AND S MACHINE AND FABRICATION CO | | 12293938-13 | 82577 | RAYTHEON COMPANY |
|
Techincal Specification:
| FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 29.0 DEGREES MINIMUM AND 31.0 DEGREES MAXIMUM | | FIRST END TAPER LENGTH | 0.045 INCHES MINIMUM AND 0.065 INCHES MAXIMUM | | HARDNESS RATING | 36.0 ROCKWELL C NOMINAL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD 1ST MATERIAL RESPONSE OR FED STD 66,COND OPTIONAL FED STD 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | | | PIN OVERALL DIAMETER | 0.1876 INCHES MINIMUM AND 0.1878 INCHES MAXIMUM | | PIN OVERALL LENGTH | 0.545 INCHES MINIMUM AND 0.565 INCHES MAXIMUM | | SECOND END STYLE | SQUARE | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SHEAR STRENGTH | 162000 DOUBLE POUNDS PER SQUARE INCH | | SPECIAL FEATURES | SYMMETRICAL DIAMOND POINT 0.208 IN. MIN 0.228 IN. MAX LG ON CHAMFERED END | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TY I,II OR III FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|