|
|
|
National Stock Number:
5315-01-243-7713
Federal Supply Class:
5315
National Item Identification Number:
012437713
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 4F41382-105A | 98897 | LOCKHEED MARTIN CORP | | 4F43827-109A | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| FIRST END LOCATION | THREADED END | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM | | FIRST END TAPER LENGTH | 0.450 INCHES NOMINAL | | FIRST STEP LENGTH | 3.500 INCHES NOMINAL | | FIRST STEP DIAMETER | 0.745 INCHES MINIMUM AND 0.748 INCHES MAXIMUM | | OVERALL LENGTH | 11.380 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ST-05-602,FSCM 98897 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP XM-13 OVERALL | | NOMINAL THREAD SIZE | 0.250 INCHES | | SECOND END TAPER LENGTH | 0.350 INCHES NOMINAL | | SECOND END TIP RADIUS | 0.250 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED | | SECOND STEP DIAMETER | 0.500 INCHES NOMINAL | | SECOND STEP LENGTH | 5.080 INCHES NOMINAL | | SPECIAL FEATURES | UNDERCUT SQUARE 0.429 IN. MIN AND 0.441 IN. MAX | | SURFACE FINISH | 16.0 MICROINCHES SHOULDER END | | THIRD STEP LENGTH | 2.794 INCHES NOMINAL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 2.120 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF | | UNDERCUT WIDTH | 0.620 INCHES NOMINAL |
|
|