|
|
|
National Stock Number:
5315-01-271-3399
Federal Supply Class:
5315
National Item Identification Number:
012713399
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 6-689-000887 | 12361 | GROVE U.S. LLC |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.310 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 8.720 INCHES MINIMUM AND 8.780 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.120 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST HOLE DIAMETER | 0.265 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | A6-829-000727,CAGEC 12361 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4140 OVERALL OR STEEL COMP 4142 OVERALL | | PIN OVERALL DIAMETER | 2.2430 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM | | PIN OVERALL LENGTH | 9.380 INCHES NOMINAL | | PROPRIETARY CHARACTERISTICS | PACS | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 0.265 INCHES NOMINAL | | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER |
|
|