| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| EXPANSION DEVICE | SERRATED STEM-TYPE W |
| FASTENER LENGTH | 0.952 INCHES MINIMUM AND 0.982 INCHES MAXIMUM |
| GRIP LENGTH | 0.781 INCHES MINIMUM AND 0.845 INCHES MAXIMUM |
| HARDNESS RATING | 48.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM STEM |
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| HEAD MAJOR DIAMETER | 0.333 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD 1ST MATERIAL RESPONSE OR ASTM A547 ASSN STD 2ND MATERIAL RESPONSE OR 66SJDDMIL-S-6758 FED STD 3RD MATERIAL RESPONSE SLEEVE |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OR ASTM A547 ASSN STD SINGLE MATERIAL RESPONSE STEM |
| MATERIAL | STEEL COMP 4027 OR STEEL COMP 4037 OR STEEL COMP 4130 SLEEVE |
| MATERIAL | STEEL COMP 8740 STEM |
| SHANK DIAMETER | 0.162 INCHES MINIMUM AND 0.164 INCHES MAXIMUM |
| SHANK STYLE | SELF-PLUGGING MECHANICALLY LOCKED STEM |
| SHEAR STRENGTH | 2340 SINGLE POUNDS PER SQUARE INCH |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL3 FED SPEC SINGLE TREATMENT RESPONSE STEM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| SURFACE TREATMENT | CADMIUM AND CHROMATE SLEEVE |
| SURFACE TREATMENT | CADMIUM STEM |