|
|
|
National Stock Number:
5320-01-086-1147
Federal Supply Class:
5320
National Item Identification Number:
010861147
Description:
RIVET,BLIND
Detail:
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes NUT, BLIND ASSEMBLY.
|
Manufacturer Information:
| 10124040 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 5320PL1574764 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | CR-212-6-7 | 11815 | SPS TECHNOLOGIES, LLC | | 5575997 | 34623 | AM GENERAL LLC | | AF3212-6-07 | 53551 | ALLFAST FASTENING SYSTEMS, LLC | | AF3212-6-7 | 53551 | ALLFAST FASTENING SYSTEMS, LLC | | CR3212-6-7 | 11815 | SPS TECHNOLOGIES, LLC | | CR3212-6-07 | 11815 | SPS TECHNOLOGIES, LLC | | CR3212-6-07 | 5M902 | HOWMET GLOBAL FASTENING SYSTEMS INC. | | CR3212-6-7 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | CR3212-6-7 | A0311 | TECNO TRADE S.R.L. | | CR3212-6-7 | C4293 | ALCOA FASTENING SYSTEMS FAIRCHILDFASTENERS EUROPE - VSD GMBH | | CR3212-6-7 | F7652 | KLX AEROSPACE SOLUTIONS II SAS | | CR3212-6-7 | FB009 | KLX INC | | HC3212-6-07 | 0HDW7 | HUCK INTERNATIONAL, INC. | | HC3212-6-07 | 17446 | HUCK INTERNATIONAL, INC | | HC3212-6-7 | 17446 | HUCK INTERNATIONAL, INC | | NAS9302BNS-6-07 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | M7885/3-6-07 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-R-7885/3 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | NAS9302BNS-6-07 | KCST9 | BAE SYSTEMS OPERATIONS LTD MILITARY AIRCRAFT DIVISION REPAIR ST | | NAS9302BNS-6-07 | U9143 | BAE SYSTEMS (OPERATIONS) LIMITED |
|
Techincal Specification:
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) | | SHANK STYLE | SELF-PLUGGING MECHANICALLY LOCKED STEM | | MATERIAL | ALUMINUM ALLOY 5056 SLEEVE | | STEEL COMP 8740 STEM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE SLEEVE | | AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE STEM | | SURFACE TREATMENT | CHROMATE SLEEVE | | CADMIUM AND | | CHROMATE STEM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE SLEEVE | | QQ-P-416,TYPE 2,CLASS 2 FED SPEC ALL TREATMENT RESPONSES STEM | | HEAD MAJOR DIAMETER | 0.357 INCHES MAXIMUM | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND | | 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 0.565 INCHES MINIMUM AND | | 0.585 INCHES MAXIMUM | | SHANK DIAMETER | 0.188 INCHES MINIMUM AND | | 0.192 INCHES MAXIMUM | | GRIP LENGTH | 0.376 INCHES MINIMUM AND | | 0.437 INCHES MAXIMUM | | EXPANSION DEVICE | SERRATED STEM-TYPE W | | SPECIAL FEATURES | "NS" LETTERS AFTER THE MATERIAL CODE "B" INDICATE NO PREFERENCE TO LOCK TYPE (MAY BE VISIBLE OR INTERNAL). RIVETS WITH NO LETTER CODE (INDICATING VISIBLE LOCK TYPE) AND RIVETS WITH THE LETTER "H" AFTER THE MATERIAL CODE (INDICATING INTERNAL LOCK TYPE) ARE BOTH ACCEPTABLE FOR THIS ITEM OF SUPPLY. |
|
|