|
|
|
National Stock Number:
5320-01-092-2125
Federal Supply Class:
5320
National Item Identification Number:
010922125
Description:
RIVET,BLIND
Detail:
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes NUT, BLIND ASSEMBLY.
|
Manufacturer Information:
| 5320PL1574743 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | AF3242-4-08 | 53551 | ALLFAST FASTENING SYSTEMS, LLC | | CR3242-4-8 | 05693 | CHERRY TEXTRON INC CHERRY COMMERCIAL FASTENERS PRODUCTS DIV OF TEXTRON INC | | CR3242-4-8 | 11815 | SPS TECHNOLOGIES, LLC | | CR3242-4-08 | 11815 | SPS TECHNOLOGIES, LLC | | AF3242-4-8 | 53551 | ALLFAST FASTENING SYSTEMS, LLC | | HR3242-4-08 | 0HDW7 | HUCK INTERNATIONAL, INC. | | HC3242-4-08 | 17446 | HUCK INTERNATIONAL, INC | | NAS9305BNS-4-08 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | M7885/7-4-08 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-R-7885/7 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | EXPANSION DEVICE | SERRATED STEM-TYPE W | | FASTENER LENGTH | 0.603 INCHES MINIMUM AND 0.623 INCHES MAXIMUM | | GRIP LENGTH | 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM | | HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) | | HEAD MAJOR DIAMETER | 0.221 INCHES MINIMUM AND 0.229 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6322 ASSN STD 2ND MATERIAL RESPONSE STEM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430 FED SPEC 1ST MATERIAL RESPONSE SLEEVE | | MATERIAL | ALUMINUM ALLOY 5056 SLEEVE | | MATERIAL | STEEL COMP 8740 STEM | | SHANK DIAMETER | 0.139 INCHES MINIMUM AND 0.143 INCHES MAXIMUM | | SHANK STYLE | SELF-PLUGGING MECHANICALLY LOCKED STEM | | SPECIAL FEATURES | "NS" LETTERS AFTER THE MATERIAL CODE "B" INDICATE NO PREFERENCE TO LOCK TYPE (MAY BE VISIBLE OR INTERNAL). RIVETS WITH NO LETTER CODE (INDICATING VISIBLE LOCK TYPE) AND RIVETS WITH THE LETTER "H" AFTER THE MATERIAL CODE (INDICATING INTERNAL LOCK TYPE) ARE BOTH ACCEPTABLE FOR THIS ITEM OF SUPPLY. | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-A-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE STEM | | SURFACE TREATMENT | CADMIUM STEM |
|
|