5360-00-052-4398 SPRING,HELICAL,COMPRESSION Index 8415-00-052-4406 PANTS,FOOTBALL

National Stock Number:
5330-00-052-4399

Federal Supply Class:
5330

National Item Identification Number:
000524399

Description:
GASKET

Detail:
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.


Manufacturer Information:
35537459364HONEYWELL INTERNATIONAL INC.
35537470210HONEYWELL INTERNATIONAL INC.
35537472599ALLIEDSIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO
35537499193HONEYWELL INTERNATIONAL INC.


Techincal Specification:
APERTURE DIAMETER0.910 INCHES MINIMUM AND 0.930 INCHES MAXIMUM
BOLT HOLE QUANTITY4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH0.901 INCHES MINIMUM AND 0.911 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH0.901 INCHES MINIMUM AND 0.911 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS0.032 INCHES NOMINAL
FSC APPLICATION DATASTARTERS,ENGINE,AIR TURBINE,AIRCRAFT AND GUIDED MISSILE PRIME MOVER TYPE
HOLE DIAMETER0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED
OVERALL LENGTH1.160 INCHES MINIMUM AND 1.220 INCHES MAXIMUM
OVERALL WIDTH1.160 INCHES MINIMUM AND 1.220 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-A-7021,CL 1 MIL SPEC ALL MATERIAL RESPONSES OVERALL
MATERIALASBESTOS AND RUBBER NATURAL OR RUBBER SYNTHETIC OVERALL
OUTSIDE CORNER RADIUS0.060 INCHES MINIMUM AND 0.100 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.130 INCHES MINIMUM AND 0.155 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.130 INCHES MINIMUM AND 0.155 INCHES MAXIMUM
STYLE DESIGNATORNON-CIRCULAR


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us