5330-00-613-8973, GASKET

National Stock Number:
5330-00-613-8973

Federal Supply Class:
5330

National Item Identification Number:
006138973

Description:
GASKET

Detail:
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.

Manufacturer Information:

9032326

18876

U S ARMY AVIATION AND MISSILE COMMAND

Techincal Specification:

APERTURE LENGTH	6.875 INCHES NOMINAL
APERTURE WIDTH	2.438 INCHES NOMINAL
BOLT HOLE QUANTITY	6
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	2.781 INCHES MINIMUM AND 2.843 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	3.594 INCHES MINIMUM AND 3.656 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED
CROSS-SECTIONAL SHAPE STYLE	SOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS	0.031 INCHES NOMINAL
HARDNESS RATING	55.0 SHORE DUROMETER A MINIMUM AND 70.0 SHORE DUROMETER A MAXIMUM OVERALL
HOLE DIAMETER	0.157 INCHES MINIMUM AND 0.219 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED
INSIDE CORNER RADIUS	0.157 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
OUTSIDE CORNER RADIUS	0.157 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.157 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.157 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
OVERALL LENGTH	7.594 INCHES MINIMUM AND 7.656 INCHES MAXIMUM
OVERALL WIDTH	3.157 INCHES MINIMUM AND 3.219 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-C-6183 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	RUBBER SYNTHETIC AND CORK OVERALL
STYLE DESIGNATOR	NON-CIRCULAR

Click here to Register for Free 30-day Trial