5330-00-673-8293, GASKET

National Stock Number:
5330-00-673-8293

Federal Supply Class:
5330

National Item Identification Number:
006738293

Description:
GASKET

Detail:
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.

Manufacturer Information:

110757

83259

PARKER-HANNIFIN CORPORATION

Techincal Specification:

APERTURE DIAMETER	1.406 INCHES NOMINAL
BOLT HOLE QUANTITY	4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	0.906 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	0.906 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED
CROSS-SECTIONAL SHAPE STYLE	METAL AND SYNTHETIC RUBBER
CROSS-SECTIONAL THICKNESS	0.080 INCHES NOMINAL
GAGE RING THICKNESS	0.120 INCHES NOMINAL
HARDNESS RATING	55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
HOLE DIAMETER	0.312 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED
OUTSIDE CORNER RADIUS	0.281 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.282 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.282 INCHES NOMINAL
OVERALL LENGTH	2.375 INCHES NOMINAL
OVERALL WIDTH	2.375 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/11 FED SPEC 1ST MATERIAL RESPONSE AND MIL-R-6855,CL 1,GR 60 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
MATERIAL	ALUMINUM ALLOY 6061 AND RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
SPECIAL FEATURES	FOUR HOLES 0.188 IN. DIA USED FOR POSITIONING LOCATED ON CENTERLINE ONE EACH SIDE OF GASKET
STYLE DESIGNATOR	NON-CIRCULAR

Click here to Register for Free 30-day Trial