5330-01-294-5280, SEAL,NONMETALLIC CHANNEL

National Stock Number:
5330-01-294-5280

Federal Supply Class:
5330

National Item Identification Number:
012945280

Description:
SEAL,NONMETALLIC CHANNEL

Detail:
An item fabricated from NONMETALLIC CHANNEL. It may be (1) formed to a specific shape with or without joints, (2) a single piece whose ends have been secured together to form a specific shape, or (3) a straight item fabricated to a specific length for a specific application with end cuts or joints. Items except for molded corners, end cut(s), and mounting facilities, such as mounting hole(s), slot(s), press fit buttons, and the like, must be one continuous cross section. It may have fabric, cord, or metal reinforcement. It is specifically designed for use in applications where there is no relative motion between joined parts. Excludes GASKET; GROMMET, NONMETALLIC; and PACKING, PREFORMED. For straight items with square end cuts and without mounting hole(s), slot(s), or press fit buttons, see NONMETALLIC CHANNEL.

Manufacturer Information:

128361-1	94271	LOCKHEED MARTIN CORP
LL-HQ6-1244	14153	DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA

Techincal Specification:

CONSTRUCTION	SOLIDSOLID
CRITICALITY CODE JUSTIFICATION	ZZZYZZZY
CROSS-SECTIONAL SHAPE STYLE	OPEN CHANNELOPEN CHANNEL
LEFT INSIDE ANGLE	90.0 DEGREES NOMINAL90.0 DEGREES NOMINAL
LEFT OUTSIDE ANGLE	90.0 DEGREES NOMINAL90.0 DEGREES NOMINAL
LEFT SIDE FLANGE HEIGHT	0.312 INCHES NOMINAL0.312 INCHES NOMINAL
LEFT SIDE FLANGE THICKNESS	0.062 INCHES NOMINAL0.062 INCHES NOMINAL
LEFT TIP STYLE	LEFT SQUARE ENDLEFT SQUARE END
LEFT TIP WIDTH	0.062 INCHES NOMINAL0.062 INCHES NOMINAL
MATERIAL	RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS	AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
RIGHT OUTSIDE ANGLE	90.0 DEGREES NOMINAL90.0 DEGREES NOMINAL
RIGHT SIDE FLANGE HEIGHT	0.312 INCHES NOMINAL0.312 INCHES NOMINAL
RIGHT SIDE FLANGE THICKNESS	0.062 INCHES NOMINAL0.062 INCHES NOMINAL
RIGHT TIP RELATIONSHIP WITH LEFT TIP	IDENTICALIDENTICAL
RIGHT INSIDE ANGLE	90.0 DEGREES NOMINAL90.0 DEGREES NOMINAL
SPECIAL TEST FEATURES	SPECIAL QUALITY CONTROL TESTING
WEB THICKNESS	0.062 INCHES NOMINAL0.062 INCHES NOMINAL
WEB WIDTH	0.219 INCHES NOMINAL0.219 INCHES NOMINAL
TEST DATA DOCUMENT	81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

Click here to Register for Free 30-day Trial