|
|
|
National Stock Number:
5340-00-270-7258
Federal Supply Class:
5340
National Item Identification Number:
002707258
Description:
CLIP,SPRING TENSION
Detail:
A preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
|
Manufacturer Information:
| 100-300-13-0 | 99378 | ATLEE OF DELAWARE, INCORPORATED | | 6020-84CC | 00779 | TE CONNECTIVITY CORPORATION | | M24066/2-244 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | M24066/2-244 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M24066/2-044 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | 6020-84CC | 91506 | AUGAT INC | | MS24066/2-244 | 80204 | AMERICAN NATIONAL STANDARDS INSTITUTE INCORPORATED | | NASM24066/2 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MIL-C-24066/2 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS17160-144 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DISTANCE FROM LOOP CENTER TO END | 0.620 INCHES NOMINAL | | HOLE DIAMETER | 0.141 INCHES MINIMUM AND 0.147 INCHES MAXIMUM | | LENGTH | 1.030 INCHES MINIMUM AND 1.070 INCHES MAXIMUM | | LOOP/HOLDING DIMENSION | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM | | OVERALL HEIGHT | 1.190 INCHES MINIMUM AND 1.230 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM | | MOUNTING METHOD | UNTHREADED HOLE(S) | | WIDTH | 1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
|
|