|
|
|
National Stock Number:
5340-01-075-3725
Federal Supply Class:
5340
National Item Identification Number:
010753725
Description:
STANDOFF,THREADED,SPACING
Detail:
A standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
|
Manufacturer Information:
| 72510018-01 | 1K426 | MOOG INC. | | 72510018-01 | 99932 | MOOG INC. |
|
Techincal Specification:
| DISTANCE FROM END TO GROOVE | 0.344 INCHES NOMINAL | | DISTANCE FROM END TO HOLE CENTER | 2.500 INCHES NOMINAL | | DISTANCE FROM END TO SMALLER GROOVE | 0.140 INCHES MINIMUM AND 0.145 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE | ROUND | | DIAMETER | 0.250 INCHES NOMINAL | | FLANGE DIAMETER | 0.374 INCHES MINIMUM AND 0.375 INCHES MAXIMUM | | FLANGE THICKNESS | 1.250 INCHES NOMINAL | | GROOVE WIDTH | 0.125 INCHES NOMINAL | | GROOVE DIAMETER | 0.281 INCHES NOMINAL | | HOLE QUANTITY PERPENDICULAR TO AXIS | 1 | | LENGTH | 4.070 INCHES NOMINAL | | SMALLER GROOVE DIAMETER | 0.253 INCHES NOMINAL | | SMALLER GROOVE WIDTH | 0.039 INCHES MINIMUM AND 0.042 INCHES MAXIMUM | | SPECIAL FEATURES | MIL P/N M45932/2-112 INSERT,SCREW THD USED FOR INTERNAL THD | | STYLE DESIGNATOR | PROJECTION AND FLANGE LEFT INTERNAL AND RIGHT EXTERNAL THREAD |
|
|