| FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 1.750 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 1.750 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.000 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| FIRST LEG HOLE DIAMETER | 0.174 INCHES MINIMUM AND 0.194 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG WIDTH | 5.220 INCHES MINIMUM AND 5.280 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11,T4 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.360 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.500 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.375 INCHES NOMINAL |
| SECOND LEG LENGTH | 2.470 INCHES MINIMUM AND 2.530 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.174 INCHES MINIMUM AND 0.194 INCHES MAXIMUM |
| SECOND LEG WIDTH | 5.220 INCHES MINIMUM AND 5.280 INCHES MAXIMUM |
| SPECIAL FEATURES | SECOND LEG HAS EIGHT ADDITIONAL HOLES VARYING IN DIA. AND FOUR TERMINALS,P/N SE079B02S |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE |