| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.253 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.310 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.310 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.160 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.000 INCHES NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.076 INCHES MINIMUM AND 0.084 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.234 INCHES MINIMUM AND 0.240 INCHES MAXIMUM |
| FIRST LEG WIDTH | 1.910 INCHES NOMINAL |
| MATERIAL | ALUMINUM ALLOY 2024 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.400 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 1.500 INCHES NOMINAL |
| SECOND LEG LENGTH | 2.750 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 0.360 INCHES NOMINAL |
| SECOND LEG END WIDTH | 0.800 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| SECOND LEG SLOT WIDTH | 0.260 INCHES NOMINAL |
| SECOND LEG STYLE | SQUARE AND TAPERED |
| SECOND LEG THICKNESS | 0.076 INCHES MINIMUM AND 0.084 INCHES MAXIMUM |
| SECOND LEG WIDTH | 1.910 INCHES NOMINAL |
| SPECIAL FEATURES | RH MOUNTING |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-A-250/4,TC FED SPEC SINGLE TREATMENT RESPONSE |