|
|
|
National Stock Number:
5340-01-086-7912
Federal Supply Class:
5340
National Item Identification Number:
010867912
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| TA4033H080908 | 84971 | TA AEROSPACE CO |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 0.500 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.050 INCHES NOMINAL | | CENTER SECTION WIDTH | 0.750 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.312 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.375 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG CORNER RADIUS | 0.500 INCHES NOMINAL | | FIRST LEG LENGTH | 0.937 INCHES NOMINAL | | FIRST LEG SLOT LENGTH | 0.500 INCHES NOMINAL | | FIRST LEG SLOT WIDTH | 0.250 INCHES NOMINAL | | FIRST LEG STYLE | CORNER RADIUS | | FIRST LEG THICKNESS | 0.050 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE SLOT | | FIRST LEG WIDTH | 0.750 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5,T0 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 2024 | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.438 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.375 INCHES NOMINAL | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG LENGTH | 0.938 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG SLOT LENGTH | 0.500 INCHES NOMINAL | | SECOND LEG SLOT WIDTH | 0.250 INCHES NOMINAL | | SECOND LEG END RADIUS | 0.500 INCHES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT | | SECOND LEG STYLE | END RADIUS | | SECOND LEG THICKNESS | 0.050 INCHES NOMINAL | | SECOND LEG WIDTH | 0.750 INCHES NOMINAL | | STYLE DESIGNATOR | DOUBLE ANGLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CHROMATE |
|
|