|
|
|
National Stock Number:
5340-01-089-3076
Federal Supply Class:
5340
National Item Identification Number:
010893076
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 12256009 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 1.160 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.060 INCHES NOMINAL | | CENTER SECTION WIDTH | 0.750 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.060 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG LENGTH | 0.440 INCHES NOMINAL | | FIRST LEG WIDTH | 0.750 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-698,T3-5 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.380 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.375 INCHES NOMINAL | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG LENGTH | 1.500 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | SECOND LEG HOLE DIAMETER | 0.271 INCHES MINIMUM AND 0.296 INCHES MAXIMUM | | SECOND LEG STYLE | SQUARE | | SECOND LEG THICKNESS | 0.060 INCHES NOMINAL | | SECOND LEG WIDTH | 0.750 INCHES NOMINAL | | SPECIAL FEATURES | CENTER SECTION CONTAINS 1 HOLE WITH A DIA OF 0.271 IN. MIN,0.296 IN. MAX,LOCATED 0.660 IN. FROM THE TOP OF THE FIRST LEG | | STYLE DESIGNATOR | DOUBLE ANGLE |
|
|